ANALISIS PENINGKATAN DERMAGA PADA PT BERLIAN MANYAR SEJAHTERA SURABAYA

Abstrak

The fender functions as a cushion that is placed in front of the pier, so that the fender can withstand the pier
structure from impact when the ship is maneuvering to lean on the pier. Ships docked at the pier still have speed
either driven by their own engines or pulled by tugboats. To avoid damage to ships and docks due to collisions, a
bearing or fender is installed in front of the dock which functions to absorb the impact energy. The amount of
impact energy caused by the ship docking to the dock can be obtained by determining the block coefficient on the
ship, the ship mass coefficient, the ship's eccentricity coefficient to the dock, and the ship's docking speed in a
perpendicular direction. The force transmitted to the pier depends on the type of fender and the allowable
deflection of the fender. When the ship hits the fender, the fender will deflect and transmit the impact force to the
pier structure. Fender planning is determined based on the energy absorbed due to ship collision. The purpose of
this study is to find out how to calculate the size of the pier required for one ship loading and unloading at the
Port of PT. Berlian Manyar Sejahtear; knowing the size and strength of the required number of fenders at the
Port of PT. Berlian Manyar Sejahtera; find out the number of fenders that will be used in upgrading the PT.
Berlian Manyar Sejahtera. The research stages or steps of the research methodology begin with conducting a preliminary study or literature which includes literature study and data identification. The existing length of the
pier is 200 meters, it will be increased by 50 meters so that the total length of the pier is 250 meters. The results
of the analysis using 2 examples of ships docked at the PT. Berlian Manyar Sejahtera The length of the pier needed
to serve the ships that dock is 226.8 meters. In the planning of PT. Berlian Manyar Sejahtera uses 1200 SCH or
1200 SPC cone type fenders with an impact energy of 0.62 tm. The results of the analysis used a 1300 SPC cone
type fender with an impact energy of 0.68 tm. Cone type fenders have a "Pad" which is a protector against the
fender rubber itself, so in the event of a ship collision that is stronger than planned, the protector will protect the
fender rubber and the dock structure. The results of the analysis using a ship weighing 56.545 tons can be used
with a cell fender type with dimensions OD x ID = 380 x 190 which has an absorption energy of 1.20 tm. The
force absorbed by the fender is 16.72 tons. For type V fenders, the KVF 200 HCA type is used which has an
absorbed energy value of 1.0 tm and a forward force of 15.35 tm with a deflection of 45%. The number of fenders
used for ships weighing 33,193 tons is 19.3 units and for ships weighing 56,545 tons is 20.6 units, so for a total
pier length of 250 meters, the number of fenders used is 22.7 units rounded up to 23 units.