ANALISIS PERBANDINGAN PASIR JAMBI DAN PASIR PONTIANAK TERHADAP KUAT TEKAN BETON

Penulis

  • Sahat Martua Sihombing Universitas Krisnadwipayana
  • Parlindungan Panjaitan Universitas Krisnadwipayana
  • Achmad Pahrul Rodji Universitas Krisnadwipayana

DOI:

https://doi.org/10.61488/sipilkrisna.v8i1.153

Kata Kunci:

Compressive Strength of Concrete, Sand Comparative Analysi, Admixture

Abstrak

This study aims to analyze the comparison of Jambi sand and Pontianak sand to the compressive strength of
concrete. Concrete is a mixture obtained by mixing Portland cement, water and aggregate, which is an additive
that varies greatly from chemical additives. For the construction of roads, bridges, buildings, etc. which are in the
concrete mix. Aggregate is the largest part in the formation of concrete, while cement and water will form a paste
that will bind the aggregate. Concrete is a function of its constituent materials consisting of cement, hydraulic,
fine aggregate, water and admixture additives. In this study, there are two types of fine aggregate used, namely
Jambi Sand and Pontianak Sand. The quality results of Jambi Sand met the organic standard and test by achieving
a result of 3, while the quality of Pontianak Sand on the organic test reached 5, and in terms of specific gravity,
Pontianak Sand was better than Jambi Sand. The results of the compressive strength of concrete with Jambi Sand
and Pontianak Sand were found to be stronger with Pontianak Sand with an average of 63.60

Unduhan

Diterbitkan

2022-03-05

Cara Mengutip

Martua Sihombing, S., Panjaitan, P., & Rodji, A. P. (2022). ANALISIS PERBANDINGAN PASIR JAMBI DAN PASIR PONTIANAK TERHADAP KUAT TEKAN BETON. Jurnal Sipil Krisna, 8(1), 32–42. https://doi.org/10.61488/sipilkrisna.v8i1.153

Artikel paling banyak dibaca berdasarkan penulis yang sama